Mitsubishi Electronics PKA-RP-KAL Manuale Utente

1. Be sure that the “Auto Off” is visible on the screen (at 1).
2. Hold down the Timer Menu button b for 3 seconds, so that “Monitor” 

is indicated on the screen (at 4).
•  The timer remaining to shutdown appears at 5.

3. To close the monitor and return to the standard control screen, press 

the Operation mode (Back) button 2.

 Hold down the Timer On/Off button 9 for 3 seconds, so that “Timer 

Off” appears (at 6) and the timer value (at 7) disappears.

 Alternatively, turn off the air conditioner itself. The timer value (at 7) 

will disappear from the screen.

 

Hold down the Timer On/Off button 9 for 3 seconds. The “Timer 
Off” indication disappears (at 6), and the timer setting comes on the 
display (at 7). 

 Alternatively, turn on the air conditioner. The timer value will appear at 

7

.

AFTER

TIMER

OFF

AUTO OFF

5

1

4

Timer Setting

°C

°C

AUTO OFF

6

7

AUTO OFF

7

°C

°C

AFTER

OFF

AUTO OFF

6

7

A

13

2

1

 Press the 

AUTO STOP

 or 

AUTO START

 button (TIMER SET).

•  Time can be set while the following symbol is blinking.
  OFF timer : A 

 is blinking.

  ON timer : A 

 is blinking.

2 

Use the 

h

 and 

min

 buttons to set the desired time.

3 

Canceling the timer. 

  To cancel the OFF timer, press the 

AUTO STOP

 button.

  To cancel the ON timer, press the 

AUTO START

 button.

•  It is possible to combine both OFF and ON timers.
• Pressing the   ON/OFF button of the remote controller during timer 

mode to stop the unit will cancel the timers.

•  If the current time has not been set, the timer operation cannot be 

used.

°C

°C

TIME SUN

FUNCTION

PAR-21MAA

ON/OFF 

FILTER

CHECK

OPERATION

CLEAR

TEST

TEMP.

MENU

BACK

DAY

MONITOR/SET

CLOCK

ON/OFF

4

1

1

Locking function 
indicator

 

If you wish, you can lock the remote controller buttons. You can use 
the Function Selection of remote controller to select which type of 
locking function to use. (For information about selecting the lock type, 
see section 8, item [4]–2 (1)).

  Specifically, you can use either of the following two locking functions.

1 

Lock All Buttons:

  Locks all of the buttons on the remote controller.
2 

Lock All Except ON/OFF:

  Locks all buttons other than the ON/OFF button. 

°C

°C

FUNCTION

1

°C

°C

FUNCTION

1

°C

°C

1

<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the 

ON/OFF button 1 for 2 seconds. The “Locking function” indicator 
appears on the screen (at 1), indicating that the locking function is 
now engaged.
*  If locking has been disabled in Function Selection of remote 

controller, the screen will display the “Not Available” message when 
you press the buttons as described above.

•  If you press a locked button, the “Locking function” indicator (at 1) 

will blink on the display.

<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/

OFF button 1 for 2 seconds—so that the “Locking function” indicator 
disappears from the screen (at 1).