Mitsubishi Electronics PUZ-A42NHA2-BS Manuale Utente

106

DISASSEMBLY PROCEDURE

OPERATING PROCEDURE

PHOTOS

PUZ-A18NHA2 PUZ-A18NHA2-BS

1. Removing the top panel, service panel, front panel and

back panel

(1) Remove the top panel fixing screws (4

10), one from the

right and two from the left side, and detach the top panel.

(2) Remove 1 service panel fixing screw (4

10) and detach

the service panel by pulling it downward. (See photo 1.)

(3) Remove the front panel fixing screws (4

10), 5 from the

front, 2 from the right and 2 from the left side, and detach
the front panel.

(4) Remove the conduit cover and cord cover fixing screw (2

pcs. 4

10), and detach the conduit cover and cord cover.

(See photo 2.)

(5) Remove the back panel fixing screws (4

10), 4 from the

right and 3 from the rear side, and detach the back panel.

2. Removing the fan motor

(1) Remove the top panel. (See photo 1.)
(2) Remove the front panel. (See photo 1.)
(3) Remove 1 nut (M6, left-screw) and detach the propeller.
(4) Disconnect the connector CNF1 on the controller circuit

board in the electrical parts box.

(5) Loosen the clamp for the lead wire in the motor support.
(6) Remove 4 fan motor fixing screws (4

18) and detach the

fan motor. (See photo 3.)

Photo 1

Photo 2

Top panel

Top panel
fixing screws

Service panel

Service panel
for charge
plug

Grille

Front panel

Photo 3

Propeller

Nut

Electrical parts box

Photo 4

Fan

motor

(MF1)

Fan motor fixing screws

Motor support

Clamp

Conduit cover
and cord cover
fixing screws

Cord cover

Conduit cover

OCH429--4.qxp 07.11.20 9:20 AM Page 106