Energy Tech Laboratories DSH Manuale Utente

JOHNSON CONTROLS

FORM 145.32-IOM1 (908)

This equipment is a relatively complicated apparatus.

During installation, operation, maintenance or service,

individuals may be exposed to certain components or

conditions including, but not limited to: refrigerants, oils,

materials under pressure, rotating components, and

both high and low voltage. Each of these items has the

potential, if misused or handled improperly, to cause

bodily injury or death. It is the obligation and respon-

sibility of operating/service personnel to identify and

recognize these inherent hazards, protect themselves,

and proceed safely in completing their tasks. Failure to

comply with any of these requirements could result in

serious damage to the equipment and the property in

IMPORTANT!

READ BEFORE PROCEEDING!

GENERAL SAFETY GUIDELINES

which it is situated, as well as severe personal injury or

death to themselves and people at the site.

This document is intended for use by owner-authorized

operating/service personnel. It is expected that this

individual possesses independent training that will en-

able them to perform their assigned tasks properly and

safely. It is essential that, prior to performing any task

on this equipment, this individual shall have read and

understood this document and any referenced materials.

This individual shall also be familiar with and comply with

all applicable governmental standards and regulations

pertaining to the task in question.

SAFETY SYMBOLS

The following symbols are used in this document to alert the reader to areas of potential hazard:

All wiring must be in accordance with published specifications and must be performed only

by qualified service personnel. Johnson Controls will not be responsible for damages/problems

resulting from improper connections to the controls or application of improper control signals.

Failure to follow this will void the manufacturer’s warranty and cause serious damage to prop-

erty or injury to persons.

DAnGER indicates an imminently haz-

ardous situation which, if not avoided,

will result in death or serious injury.

CAUTION identifies a hazard which could

lead to damage to the machine, damage

to other equipment and/or environmen-

tal pollution. Usually an instruction will

be given, together with a brief explana-

tion.

WARNING indicates a potentially haz-

ardous situation which, if not avoided,

could result in death or serious injury.

NOTE is used to highlight additional in-

formation which may be helpful to you.