Toshiba RAS-M16EKCVP-E Manuale Utente
– 58 –
All indicators, except for the clock time indicator, are displayed by pressing the
button.
a
Transmission mark
This transmission mark (
This transmission mark (
) indicates when the remote control transmits signals to the indoor unit.
b
Mode indicator
Indicates the current operation mode.
• Heat pump models
Indicates the current operation mode.
• Heat pump models
(AUTO: Automatic control, A: Auto changeover control,
: COOL,
: DRY,
: HEAT)
• Cooling-only models
(AUTO: Automatic control, A: Auto changeover control,
: COOL,
: DRY,
: FAN ONLY)
c
Temperature indicator
Indicates the temperature setting (17˚C to 30˚C).
Indicates the temperature setting (17˚C to 30˚C).
d
PURE indicator
Shows that the electrical air purifying operation is in progress.
Shows that the electrical air purifying operation is in progress.
e
FAN speed indicator
Indicates the selected fan speed. AUTO or one of five fan speed levels (LOW
,
LOW+
, MED
, MED+
, HIGH
) can be shown.
Indicates AUTO when the operating mode is either AUTO or
: DRY.
f
TIMER and clock time indicator
The time setting for timer operation or the clock time is indicated.
The current time is always indicated except during TIMER operation.
The time setting for timer operation or the clock time is indicated.
The current time is always indicated except during TIMER operation.
g
Hi POWER indicator
Indicates when Hi POWER operation starts.
Press the Hi POWER button to start and press it again to stop operation.
Indicates when Hi POWER operation starts.
Press the Hi POWER button to start and press it again to stop operation.
h
(MEMORY) indicator
Flashes for 3 seconds when the MEMO button is pressed during operation.
The
The
mark is shown when holding down the button for more than 3 seconds
while the mark is flashing.
Press another button to turn off the mark.
Press another button to turn off the mark.
i
ECO indicator
Indicates when the ECO is activated.
Press the ECO button to start and press it again to stop operation.
Indicates when the ECO is activated.
Press the ECO button to start and press it again to stop operation.
j
A. B change indicator remote control
• When the remote control switching function is set, “B” appears in the remote
• When the remote control switching function is set, “B” appears in the remote
control display. (When the remote control setting is “A”, there is no indication at this position.)
f
e
g
i
c
a
bhj
d
In the illustration, all indicators are shown
for purposes of explanation. During
operation, only the relevant indicators are
shown on the remote control.
operation, only the relevant indicators are
shown on the remote control.
9-5-2. Name and Functions of Indications on Remote Controller
[Display]