Toshiba R410A Manuale Utente

80

Power supply
Turn on the power supply of the air conditioner 12 hours before starting the operation.

speed.
When selecting AUTO, fan speed is
automatically changed.
(During FAN mode, the air speed is not.)

<Recommended temperature>
• During FAN mode, the temperature

cannot be set up.

Push 

 button.

When stopping the unit by the remote
controller, the fan of the outdoor unit, the
fan or the outdoor unit may keep operating
for a while even if the compressor of the
outdoor unit has stopped.

• When the unit cannot be stopped by the remote controller.

Turn off the main power switch or the leakage breaker, and then contact the shop which you
purchased the unit.

• In heating, if the room is not enough heated with FAN  , select FAN 

 or 

.

• As the temperature sensed by the temp. sensor periphery of the suction port of the

indoor unit, it differs from in the room according to the installation state. Set the tempera-
ture considering the setup value as the standard temperature in the room.

When all indoor units in the identical refrigerant system are controlled as a group and when
all indoor units are installed in the same room, the cooling or heating operation is automati-
cally performed with the difference between the setup temperature and the room tempera-
ture.

˚C
˚F

TEST

SETTING