Toshiba RAM-SM560UT-E Manuale Utente
103
Installation of Remote Controllers
Precautions
1. Low-voltage circuit provision is used for remote
controller communication, and as such, the remote
controller cable is subject to the low-power circuit
provision of internal wiring regulations and therefore
it cannot be brought into direct contact with a high-
voltage AC power line, or housed in the same
conduit tube as a power line.
controller cable is subject to the low-power circuit
provision of internal wiring regulations and therefore
it cannot be brought into direct contact with a high-
voltage AC power line, or housed in the same
conduit tube as a power line.
Flush wall mounting
• Feed the 3-core cable (obtained locally) though the
back of the remote controller and then connect to the
ABC terminals.
ABC terminals.
• Attach the remote controller to the wall using two
suitable mounting screws (obtained locally).
Wall surface mounting
• Attach the remote controller to the wall using two
suitable mounting screws (obtained locally).
• Connect the 3-core cable (obtained locally) to the
ABC terminals.
• Make a U-shaped cut-out in the center of the top
edge of the decorative cover and pass the 3-core
cable though the cut-out.
cable though the cut-out.
Remote Controller Cabling
Cabling diagram
• For details of cabling/installation of the remote
controller, refer to the Installation Manual packaged
in the remote controller.
in the remote controller.
Terminal block
for remote controller
cabling of indoor unit
for remote controller
cabling of indoor unit
A
B
C
B
C
A
B
C
B
C
Remote controller cable
(Local procure)
(Local procure)
Remote
controller unit
or sensor part
controller unit
or sensor part
3-core cable,
obtained locally
obtained locally
Mounting screws (x 2)
obtained locally
obtained locally
3-core cable,
obtained locally
obtained locally
Mounting screws (x 2)
obtained locally
obtained locally
8
ELECTRICAL WORK