Mitsubishi Electronics 838 SERIES Manuale Utente

(TV Software Versions 012.06 and later)
To display 3D gaming or 3D cinema content, your 
Mitsubishi TV requires:
•  A compatible 3D source device outputting a 3D 

signal in one of these formats:

 

-

Frame Packing 1080p/24 Hz or 720p/60 Hz

 

-

Top-Bottom 1080p/24Hz or 720p/60 Hz

 

-

Side-by-Side format, 1080p, 24/30/60 Hz; 720p, 
60 Hz

 

-

Checkerboard format, 1080p, 60-Hz; (lower 
resolutions may be supported but will not fill the 
screen)

•  Active-shutter 3D glasses, DLP link type or IR 

emitter type with matching emitter

Press 

MENU to see your TV’s software version dis-

played in the lower left corner of the main menu.  
Versions 012.06 and later carry enhanced 3D video 
options.

If your 3D glasses came with an emitter box, 
connect the emitter box to the 

EMITTER jack.  Place the box in front of the TV 
where there is a clear path to the glasses.

Note:  If your glasses are marked DLP Link, skip this 

step; no emitter box is required with DLP Link 
technology.

++

+

++

+

Power on the TV and the source device.

Connect the source device to the TV’s HDMI input.

When the 

New Device Found screen displays, 

name the input.

Press 

EXIT to close the New Device Found screen.

Automatic
•  When the TV detects a 3D signal from an 

HDMI 1.4a-compliant device, it switches 
automatically to 3D mode and selects the 
correct 3D format.

•  When receiving a normal 2D signal, the TV 

automatically exits 3D mode.

Off
•  Turns off 3D images.
•  Restores normal TV operation when viewing a 

normal 2D signal.

Choice of Source Formats
If your device is non-HDMI 1.4a compliant, 
you must choose the correct setting from 
this list.