Philips HTS3010 Manuale Utente

34

(underlined options are the factory default settings)

Speakers Volume    Access the speaker’s level setup menu. Use     keys to adjust 

the volume level for each connected speaker between -6dB to 
+6dB. See ‘Getting Started - Setting the speakers’ channels’.

  Access the speaker’s distance setup menu. Use     keys to set 

the delay times for the centre and rear speakers based on the 
listening position and distance. See ‘Getting Started - Setting 
the speakers’ channels’.

Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot 
change in distance. Use the longer delay time settings when the rear 
speakers are closer to the listener than the front speakers.

  This feature enables you to convert the music CD to a 

higher sampling rate using sophisticated digital signal 
processing for better sound quality. 

{ Off } 

–  Turn off CD-upsampling.

{  88.2 kHz (X2) } –  To convert the sampling rate of the CDs 

twice as high as the original rate.

Notes:  
–  If you have activated the CD upsampling feature, the audio output 
automatically switches to stereo mode.
–  If you press the SURROUND button on the remote control to select 
multi-channel mode, it turns off the CD upsampling feature.

  This feature allows you to adjust the audio delay times if the 

video playback is slower than the audio output streams.

 Use 

   keys to set the delay times for the audio output 

between 0~200ms.