Honeywell CT3611 Manuale Utente
69-1081—3
14
NOTE:
Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
q Press
or
until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (7°C to 31°C) for heating and 45°F to 99°F (9°C to 37°C) for cooling.
q Press
to switch between setpoints.
NOTE:
Program times are the same for heating and cooling.
q Press
or
until the display shows the desired temperature setpoint.
q Press
,
or
and repeat these steps for each program period. The first day is now programmed.
q Repeat each step in Program the First Day for the rest of the week.
NOTE:
After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
q Press
when the entire week is programmed.
Copy a Day
Your thermostat can copy program settings from one day to another.
q Press
, , or
to enter programming mode.
q Press
until the display shows the day you want to copy.
q Press
. The display shows.
q Press
until the display shows the day you want to copy to.
Heat/Cool
Settings
Leave
Return
Sleep
Run
Program
Wake
Leave
Return
Sleep
Day
M13327
Mon
Copy
M13328
Mon
Wed
Day
69-1081.fm Page 14 Wednesday, May 18, 2005 9:03 AM