StorageTek 312564001 Manuale Utente
DB2 Manager User Guide
21
StorageTek
Proprietary
After unloading the sample parameter library, review all parameter values,
and amend as necessary to reflect the host system's operating environment,
and your own requirements for DB2 Manager migration and retrieval
processing.
and amend as necessary to reflect the host system's operating environment,
and your own requirements for DB2 Manager migration and retrieval
processing.
Refer to chapter 3 of this manual for a full description of the DB2 Manager
parameter library and the format of individual parameters.
parameter library and the format of individual parameters.
Perform MVS host system modifications
The following MVS system changes will be required in order to implement
DB2 Manager:
DB2 Manager:
a. APF-authorize DB2 Manager and Archive Manager load libraries.
The DB2 Manager load library (file 4 from the distribution tape) and the
Archive Manager load library (created during the Archive Manager installation
process) should both be APF-authorized (APF-authorization is optional for
stand-alone Archive Manager operation). Refer to IBM system
documentation for a description of how to perform this procedure on your
system.
Archive Manager load library (created during the Archive Manager installation
process) should both be APF-authorized (APF-authorization is optional for
stand-alone Archive Manager operation). Refer to IBM system
documentation for a description of how to perform this procedure on your
system.
b. Create DB2 Manager control region procedure.
The JCL member LCDDB2 from the distributed JCL library (file 3 on the
distribution tape) should be copied to a system procedure library and
amended as appropriate. The member and procedure name may be
modified as required. Update the procedure with the names of the load and
parameter libraries created during the distribution tape unload process. A
listing of the distributed LCDDB2 procedure is given in appendix A.
distribution tape) should be copied to a system procedure library and
amended as appropriate. The member and procedure name may be
modified as required. Update the procedure with the names of the load and
parameter libraries created during the distribution tape unload process. A
listing of the distributed LCDDB2 procedure is given in appendix A.
The LCDDB2 procedure must be started in order to initiate DB2 Manager
control region processing. Note that the control region started task may be
given any name chosen during install processing. The procedure will be
referred to as LCDDB2 throughout the remainder of this manual.
control region processing. Note that the control region started task may be
given any name chosen during install processing. The procedure will be
referred to as LCDDB2 throughout the remainder of this manual.
c. Assign DB2 Manager user identification.
A unique system user identification (eg. LCDDB2) should be assigned for
DB2 Manager use, using whatever system security product is installed on the
host system. This user id should be assigned to execution of the DB2
Manager control region,.
DB2 Manager use, using whatever system security product is installed on the
host system. This user id should be assigned to execution of the DB2
Manager control region,.
The DB2 Manager user id may be used to control access to protected system
resources, as determined by the system security administrator.
resources, as determined by the system security administrator.
d. Update the system Program Properties Table (PPT).
The PPT should be updated in order to identify the DB2 Manager control
region program OTDBP200 as a non-swappable system task. Refer to IBM
system documentation for a description of how to perform this procedure on
your system.
region program OTDBP200 as a non-swappable system task. Refer to IBM
system documentation for a description of how to perform this procedure on
your system.