Samson XP100 Manuale Utente

13

•  Operating a microphone or turntable in front of a speaker is a sure formula for 

feedback and/or rumble problems, so always place the Expedition Pro in front 
of any mics or turntables that are being used.

•  Use the Expedition Pro upright for all “front-of-house” PA applications;          use 

it in its tilt-back position only for onstage monitoring.

•  Always raise the speakers as high above the audience as is practicable for maxi-

mum coverage.

•  Use sufficient enclosures for the space you’re in.  The larger the space, the more 

speakers will be required.

The underside of the Expedition Pro contains a 1-3/8" stand mount socket that 
allows it to be raised up on any standard speaker pole mounting (such as the 
Ultimate Support Systems TS-30 or TS-33 speaker stands).  Pole-mounting is gen-
erally advisable when you want to maximize the distance that the Expedition Pro 
covers (sometimes called speaker “throw”).

If you are using an EX500 subwoofer, you can use its integral pole mount to place 
an XP100, XP200 or XP300 immediately above it, creating a complete   column of 
sound.

As shown in the illustration below, the top panel of the Expedition Pro contains a 
number of fly points, located in compartments to the left and right of the     wire-
less receiver compartment.  The covers placed over these compartments are sim-
ply attached with double-sided sticky tape, so just pull up to remove.

ENGLISH

13