Vocopro Club-8000 Manuale Utente

                 

VP-2100 PRO to VX-15 speakers

Using the SPEAKON style to ¼” adapter and ¼”(m) to 

¼”(m) cable (included):

1. Connect the SPEAKON style end to CH.1 on the rear 

panel of the VP-2100 PRO 

2. Connect one end of the ¼” cable to the ¼” end of the 

adapter

3. Connect the other end of the ¼” cable to one of the 

four VX-15’s.  

3. Repeat this for the second speaker, except now connect 

the SPEAKON style end to CH. 2 on the VP-2100 PRO and 
the ¼” end to the second VX-15 speaker.

Using a ¼”(m) to ¼”(m) cable

1. Connect one end of the ¼” cable to the open ¼” jack 

on the rear of speaker 1 

2. Connect the other ¼” end to the back of the 3rd 

speaker.  

3. Repeat this for the final speaker now going from the 

back of speaker 2 and into the 4th speaker.

4

BALANCED INPUTS

LOW CUT

FILTER/ 

THROUGH

THROUGH

CH 2

CH 1

SPEAKER OUTPUTS

MODEL

STEREO

MONO

BRIDGE

ON

OFF

50Hz

30Hz

                 

Connecting Microphones to the KJM-8000+

Using either a mic cable with two XLR ends (Fig. A) or an XLR to ¼” cable (Fig. B):

Connect the microphone cables to the MIC inputs on the rear panel of the KJM-8000+.

5

CDG(1)

DVD(2)

LD(3)

CDG(1)

DVD(2)

LD(3)

                 

Adding the VSP-M1 to the CLUB-8000 system

Using either a mic cable with two XLR ends or an XLR to ¼” cable:

1. Connect the XLR(f) end to the LEFT BALANCED OUTPUT on the rear panel of the VSP-M1.

2. Connect the XLR(m) or ¼” end to MIC input 1 on the rear panel of the KJM-8000+.

3.  Follow the above steps, now going from the RIGHT BALANCED OUTPUT on the VSP-M1 to MIC input 2 on the rear panel 

of the KJM-8000+.

4.  Connect the mics to the mic inputs on the rear panel of the VSP-M1.

6

CDG(1)

DVD(2)

LD(3)

VSP-M1 Processor

KJM-8000 PRO Mixer 

KJM-8000+ Mixer 

VP-2100 PRO Amplifier