CyberData 930095K Manuale Utente

 Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

Operations Guide

930095K

CyberData Corporation

15

3. After changing the parameters, click Save Settings.

2.3.4 Configure the SIP Parameters

1. Click SIP Setup to open the SIP Setup page (

For specific server configurations, go to the following URL:

http://www.cyberdata.net/support/voip/ceilingspeaker.html

If the speaker is set up for MGROUPS, the SIP settings will be grayed out.

RTFM Announcement

a

Enable/Disable the speaker tone (beep) and audio 
associated with the RTFM switch.

Click on this button to save your configuration settings.

Click on this button to do an audio test. Generates a voice 
message for testing the speaker audio quality and volume.

Link to the Network Setup page.

Link to the SIP Setup page.

Link to the MGROUPS Setup page.

Link to the Upgrade Firmware page.

Link to the Home page.

a.If you select No for RTFM Announcement, you will not hear a beep or associated RTFM audio. 
However, the return to default settings function remains active. If you wish to return to default 
settings, hold the RTFM button at least 20 seconds, then release the button.