Philips FW-V330 Manuale Utente
13
English
3140 115 29791
Basic Functions
IMPORTANT!
Before operating the system, complete the
preparation procedures.
Before operating the system, complete the
preparation procedures.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL - PRESS PLAY" is displayed.
2
Press
ÉÅ on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "
and "
AUTO".
➜
PROG
starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby or demonstration mode, press and
hold
hold
ÉÅ on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
Press
ÉÅ again to start installation.
➜ All previously stored radio stations will be
replaced.
replaced.
To exit without storing the Plug and Play
● Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during Plug
and Play, "
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during Plug
and Play, "
CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
within 15 seconds, the system will exit Plug and
Play mode.