Philips FW-V330 Manuale Utente
27
English
3140 115 29791
Tape Operation / Recording
Rewinding / Fast forwarding
1
Stop playback, press
à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
rewinding or fast forwarding.
2
Press
Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (VCD or
TUNER, for example).
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (VCD or
TUNER, for example).
General information on
recording
recording
● If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
accidental mixing with other recording source.
● For recording, use only tape of IEC type I
(normal tape).
● The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
DSC and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and
end of the tape, nothing will
be recorded for six to seven
seconds.
end of the tape, nothing will
be recorded for six to seven
seconds.
● To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
on the left shoulder of the
tape side you want to protect.
● If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
adhesive tape over the opening.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
Preparation for recording
1
Press TAPE to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
spool to the left.
3
Prepare the source to be recorded.
VCD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
VCD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜
➜
REC
starts flashing.
● It is not possible to listen to another source,
except tape dubbing.
● It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording / Recording
the mixed sound
the mixed sound
1
Press VCD 1/2/3, TUNER or AUX to select
the source.
the source.
● You can connect a microphone to record the
mixed sound (refer to “Karaoke - Microphone
Mixing”).
Mixing”).
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
● Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE" will be displayed.
CD Synchronised start recording
1
Press VCD 1/2/3 to select the disc.
● Press í or ë to select the desired track to
start recording.
● You can programme the tracks in the order you
want them to be recorded (refer to “CD/VCD/
MP3-CD Operations - Programming the disc
tracks”).
MP3-CD Operations - Programming the disc
tracks”).
2
Press RECORD to start recording.
➜ The disc will start playback automatically.
➜ The disc will start playback automatically.