Philips HTS3154 Manuale Utente

Pagina di 53
42
English
Radio Operations
Before you start ...
Make sure the FM and AM/MW antennas 
antennas 
are connected.
are connected.
Tuning to radio stations
A
 Press SOURCE repeatedly until ‘FM’ 
appears on the display panel (or press 
RADIO on the remote control).
B
 Press   /   on the remote control to 
start tuning.
 
The frequency indication starts to 
change until a radio station with suffi cient 
signal strength is found.
C
 
Repeat step 
B
 if necessary until you fi nd 
the desired radio station
D
 To fi ne-tune the reception of a weak 
station, press 
 / 
 briefl y and 
repeatedly until an optimal reception is 
found.
Helpful Hint:
–  If the FM radio station is transmitting RDS 
(Radio Data System) data, the RDS name 
will be displayed and stored. 
Presetting radio stations
You can store up to 40 FM and 20 
AM/MW preset radio stations in the 
memory. There are three different ways 
to program the radio stations:
–  Using auto install (for fi rst time setup 
only)
–  Using automatic preset 
–  Using manual preset 
Helpful Hints:
–  This unit exits presetting mode if no 
button is pressed within 20 seconds.
–  If no stereo signal is detected or less than 
5 (fi ve) stations are detected during radio 
installation, ‘CHECK ANTENNA’ appears.
Using auto install
When you access the ‘RADIO’ mode for 
the very fi rst time, you will be prompted 
to install the radio stations.  With this 
feature, you can install all the available 
radio station automatically with one 
touch of button. 
SLEEP
RADIO
A
 Press RADIO.
 ‘AUTO INSTALL ... PRESS PLAY’ 
appears.