Manualsbrain.com
  1. Manuali
  2. Marche
  3. Philips
  4. 32PFL5606
  5. Manuale Utente

Philips 32PFL5606 Manuale Utente

Scarica
Pagina di 41
33
English
Set TV speakers to EasyLink mode
If you connect an HDMI-CEC compliant device 
that includes speakers, you can choose to hear 
the TV from those speakers instead of the TV 
speakers.
When you play content from an EasyLink 
compliant home theatre, if you want to mute 
the TV speakers automatically, turn on EasyLink 
mode.
1
  Connect an HDMI-CEC compliant device 
to the HDMI connector.
2
  Connect an audio cable from the SPDIF 
OUT connector to the EasyLink-compliant 
device’s AUDIO IN connector. 
3
  Configure the HDMI-CEC compliant 
device properly (see the device user 
manual).
4
 Press 
MENU.
5
 Select 
[Setup] > [TV settings] > 
[EasyLink] > [TV speakers].
6
  Select one of the following, then press OK.
•  [Off]: Switch off TV speakers.
•  [On]: Switch on TV speakers.
•  [EasyLink]: Stream TV audio through 
the connected HDMI-CEC device. 
Switch the TV audio to the connected 
HDMI-CEC audio device through the 
adjust menu.
•  [EasyLink autostart]: Turn  off TV 
speakers automatically and streams TV 
audio to the connected HDMI-CEC 
audio device.
Note
 
•
To mute the TV speakers, select [TV speakers] > [Off].
Select speaker output with Options menu
If [EasyLink] or [EasyLink autostart] are 
selected, access the Options menu to switch 
the TV  audio.
1
  While you watch TV, press   OPTIONS.
2
 Select 
[Speakers], then press OK.
Note
 
•
The EasyLink-compliant device must be switched on 
and selected as the source.
 
•
Philips does not guarantee 100% interoperability with 
all HDMI CEC devices.
Switch on or off EasyLink
When you play an HDMI-CEC compliant 
device, the TV switches on from standby, and 
switches to the correct source.
Note
 
•
If you do not intend to use Philips EasyLink, switch it off.
1
 Press 
MENU.
2
 Select 
[Setup] > [TV settings] > 
[EasyLink] > [EasyLink].
3
 Select 
[On] or [Off], then press OK.
Use one-touch play
1
  After you switch on EasyLink, press play on 
your device. 
 
»
The TV automatically switches to the 
correct source.
Use one-touch standby
When you press   on the TV remote control, 
the TV and all HDMI-CEC compliant devices 
switch to standby mode.
1
 Press  (Standby-On) on the TV’s or 
device’s remote control. 
 
»
The TV and all connected HDMI 
devices switch to standby.
EN