Carson SA-430-17 Manuale Utente

SA-430-17  Installation and Operating Instructions 

Page 11 of 15 

 

 

08/05/08 

CP5010A 

 

SIREN SWITCH 
This momentary push-button switch provides Horn or Manual tone control.  
It can optionally control Horn Ring Cycler 2 operation in the Standby position 
if the HRC2 option is selected. 

SIREN

Horn - A simulated Air-horn tone momentarily sounded. 
Manual Wail - Manual control of Wail tone rise and fall. 
Manual Mech - Manual control of Mech tone rise and fall. 

 

The Siren push-button optionally provides the following function while in Standby mode. 

See OPTION SWITCHES section. 

 

OFF 

OFF  (Default)   Produces Horn tone while pressed. 

ON 

OFF  Manual control of Mechanical tone. 

Also Mechanical tone continues to fall when Rotary 

Selector Switch is changed from Mechanical position. 

OFF 

ON 

Manual control of Wail tone. 

ON 

ON 

Activates Horn Ring Cycler 2 (HRC2) function. 

 

During installation an auxiliary input may be connected to the horn ring or other switching 

device.  It provides the same operation as pressing the Siren push-button. 

HORN RING CYCLER 2  (HRC2) 

During installation, the auxiliary input must be connected and the HRC2 option selected.  While 

the siren is in standby, tap the horn ring for different tones. 

See OPTION SWITCHES section for further details. 

Radio Volume

The radio repeat volume level is set using an adjustment on the side 

of the amplifier.  Set the Selector Switch to the Radio position and 

turn on the power.  With the radio volume itself set to a normal level, 

set the siren radio volume adjust control to the desired level. 

During installation, a cutout input may be connected to a door switch. It turns off any siren tone 

when the door is opened. The siren tone will continue to be cut off even when the door is 

closed.  Changing any switch or input will restore normal function.