Behringer A500 Manuale Utente
7
REFERENCE AMPLIFIER A500
4. INSTALLATION
3. APPLICATION EXAMPLES
3.1 Stereo mode
In this mode, both channels run independently with a separate
input signal. Connect passive loudspeakers, preferably high-
quality studio monitors, such as the BEHRINGER TRUTH B2031P.
Set the STEREO/BRIDGED MONO switch
to STEREO to
enable stereo mode.
+
Please use the POWER switch to power down your
A500 before making any changes to the operating
mode settings.
+
Keep in mind the minimum load impedance of
4 Ohms per channel in stereo mode.