Toshiba IK-TF7P2 Manuale Utente
15
Changing the setting in SS (synchro. scan) mode
(1. 2)
• Shutter mode MANU, SS, E.TRG, AUTO
• Synchro. scanning setting
• Synchro. scanning setting
refer to the item "7.3 Synchro. Scan Operation".
MODE
SS
SS
OFF
OUT.P
OFF
SHUTTER
<MODE = SS>
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
• Partial scanning switch
（PART switch）
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
(a) Changing the shutter speed setting
Move the “
aa
” to SS by pushing [MENU UP], [MENU DOWN] buttons.
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
aa
(b) Partial scanning setting
Move the “
aa
” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
aa
Move “
caa
” to the current value by pushing [MENU UP], [MENU DOWN] buttons.
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
daa
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a characteristic of
CCD, and is not a symptom of malfunction.
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a characteristic of
CCD, and is not a symptom of malfunction.
120730c1_IK_TF7P2_EN.indd 15
12.7.30 1:19:01 PM