Toshiba IK-TF7P2 Manuale Utente

Changing the setting in PW SNR mode

( 1.3. 3)

MODE

E.TRG

PW SNR

TRG.P
OUT.P

OFF

SHUTTER

• E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

• Input trigger pulse setting at PW SNR and PW SR

• Shutter mode MANU, SS, E.TRG, AUTO

Input trigger pulse : positive polarity
Input trigger pulse : negative polarity

Move up down

by pushing

MENU UP, DOWN

Select the desired

value by pushing

DATA UP, DOWN

• Partial scanning switch

（PART switch）

OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps

(a) Changing the polarity of the input trigger pulse setting

Move the “

aa

” to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

Select either

aa

by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

Move the “

aa

” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.

Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

aa

Move “

caa

” to the current value by pushing [MENU UP], [MENU DOWN] buttons.

Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.

daa
* The preset value of partial scanning is not displayed, when OUT.P is OFF.

Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras
become: fixed pattern noise, white pixels, etc.

120730c1_IK_TF7P2_EN.indd 18

12.7.30 1:19:01 PM