Toshiba IK-TF7P2 Manuale Utente
37
BEFORE MAKING A SERVICE CALL
10.
Symptom
Items to be checked
No image
• Is the power supplied correctly?
• Is the lens iris adjusted correctly?
• Are the cables connected correctly?
• Is the shutter mode set correctly?
• Is the image process equipment set correctly?
• Is the lens iris adjusted correctly?
• Are the cables connected correctly?
• Is the shutter mode set correctly?
• Is the image process equipment set correctly?
Poor color
• Is the monitor adjusted correctly?
• Is the white balance of the camera adjusted correctly?
• Is there enough illumination?
• Is the white balance of the camera adjusted correctly?
• Is there enough illumination?
SPECIFICATIONS
11.
Power supply
DC 10V ~ DC 13.2V
Power consumption
Approx. 3.1W (When the DC power supply is 12V)
Pick-up system
RGB, 3CCD
Image sensor
1/3inch All pixels CCD
(Effective pixels Horizontal : 1034, Vertical : 779)
(Effective pixels Horizontal : 1034, Vertical : 779)
Scanning System
Progressive scan
Video output pixels
Horizontal pixels : 1024, Vertical : 768
Pixel clock frequency
29.5MHz
Sync signal frequency
Horizontal : 23.229kHz, Vertical : 29.18Hz
Sync system
Internal/External (Automatic switching)
Sensitivity
F6.8 standard (2000 lx, 3000K)
Minimum illumination
14 lx (F2.2, Sensitivity + 18 dB, 3000K)
Lens mount
C mount (flange back : 17.526 mm in-air)
Ambient temperature
0 to 40°C (32 to 104°F)
Ambient humidity
Less than 90%
Weight
Approx. 158g (0.338lbs)
External dimension
44 (W) x 44 (H) x 78 (D) mm
(1.73” (W) x 1.73” (H) x 3.07” (D)) (except for protruded portion)
(1.73” (W) x 1.73” (H) x 3.07” (D)) (except for protruded portion)
White balance
AWB (Automatic white balance), MANUAL (Manual)
Gain
MANUAL (Manual), OFF (0 dB)
Partial scanning
40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
Output signal
8-bit RGB, Digital output (Camera Link format)
Sync signal output
FVAL, LVAL, DVAL (Positive polarity)
Pixel Clock
Pixel Clock
External sync input
HD : CC3 (LVDS input) Negative polarity
VD : CC4 (LVDS input) Negative polarity
VD : CC4 (LVDS input) Negative polarity
External trigger input
CC1 (LVDS input), More than 2 μs pulse width
Partial scanning control
signal input
signal input
CC2 (LVDS input)
Interface
Serial data interface : Ser TC (RXD), Ser TFG (TXD)
The designs and specifications are subject to change without notice.
If any change occurs, we will revise the manual, etc.
If any change occurs, we will revise the manual, etc.
120730c1_IK_TF7P2_EN.indd 37
12.7.30 1:19:05 PM