Toshiba IK-TF7P2 Manuale Utente

  Refer to the item “ 4. CONNECTION”, connect each component correctly.
  Turn on the power source of the connected equipment and the camera.
c  Point the lens at the object, adjust the lens iris, focus, etc..
d  Refer to the item “5.1 White Balance”, to do the adjustment.
e  Refer to the items “5.2 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY”, select the necessary items.

For the white balance adjustment of this unit, AWB (Automatic White Balance) and MANU (Manual white balance) 
adjustments are provided. To select the desired mode, refer to the items “7.2 (3) WHT BAL (White balance)” and “7. 
MODE SETTING BY ON SCREEN DISPLAY”.

Outline Adjust white balance by displaying a white object 

inside the area set by AWB menu and pressing 
the [DATA UP] button.

Adjust the white balance manually using the WHT 
BAL menu while shooting a white object.

When the shutter mode is E.TRG, AWB is not 
available.

Adjustment is performed by confirming with a 
monitor etc.

  AWB (Automatic white balance)

• Set the MODE to AWB on the WHT BAL menu.

Perform the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item “7.2 (3) WHT BAL (White balance)”.)
3200K : Appropriate for indoor shooting.
5600K : Appropriate for outdoor shooting.

• If the index menu/menu is displayed, press the [DISP] button to disable the character display on the menu.
• Shoot a known white object that fills the screen and push [DATA UP] button for approx. 1 second.
• The character AWB blinks on the screen when the AWB starts.
• The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1 second.

Automatic white balance adjustment finished correctly.

Automatic white balance adjustment cannot be performed because the video level is too low.
Set the video level propely.

Automatic white balance adjustment cannot be performed because the video level is too high.
Set the video level propely.

Automatic white balance adjustment cannot be performed because the color temperature is 
too low.
If the C.TEMP is set to 5600K, set to 3200K.
If the message appears with the C.TEMP set to 3200K, change the illumination or use a color 
temperature conversion filter.

Automatic white balance adjustment cannot be performed because the color temperature is 
too high.
If the C.TEMP is set to 3200K, set to 5600K.
If the message appears with the C.TEMP set to 5600K, change the illumination or use the 
color temperature conversion filter.

Automatic white balance adjustment cannot be performed because the shutter speed mode 
is E.TRG mode.

Automatic white balance adjustment cannot be performed for other reasons. Such as no 
white area is included in an object, etc.

120730c1_IK_TF7P2_EN.indd   9

12.7.30   1:18:59 PM