Jacuzzi J-210 Manuale Utente
page 7
9.0 Control Functions
9.1 Control Panel
A. LED Display: Can
A. LED Display: Can
display current water
temperature (default dis-
play), water temperature
set point, selected skim-
ming/heating mode, and
error messages.
temperature (default dis-
play), water temperature
set point, selected skim-
ming/heating mode, and
error messages.
B. Warmer ( + ) Button: Increases water temperature set point.
C. Cooler ( - ) Button: Decreases water temperature set point.
D. Light Button: Turns underwater light on and off.
E. Jets Button: Turns jets pump # on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump off.
pump off.
F. Jets 2 Button (J-230 Models): Turns high-speed jets pump #2 on
and off. Press once to turn pump #2 on; press a second time to turn
pump #2 off.
pump #2 off.
G. Heat Indicator: Lit when heater is on.
Operation Details
•
•
Temperature Adjustment: 80 to 04°F (27 to 40°C). Factory default
setting is 00°F (38°C).
setting is 00°F (38°C).
•
Underwater Light operation: Light runs for hour then shuts off for
increased bulb life.
increased bulb life.
•
Jets /Jets 2 Button operation: Jets run for 20 minutes when acti-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
g
A
b
C
D
E
F