Shindaiwa LE242/EVC Manuale Utente

6

251043

1.  Loosen the air cleaner cover knob and 

remove the air cleaner cover. 

See Figure 7.

.  Loosen the lock nut on the cable ad-

juster. See Figure 8.

Assembly and Adjustments

The throttle lever free play should be ap-

proximately /16-1/4 inch (4-6 mm). See 

Figure 6. Make sure that the throttle lever 

operates smoothly without binding.  

If it becomes necessary to adjust the lever 

free play, follow the procedures and illustra-

tions that follow. 

.  Turn the cable adjuster in or out as 

required to obtain proper free play  

/16-1/4 inch (4-6 mm). See Figure 8.

4.  Tighten the locknut.

5.  Reinstall the air cleaner cover.

Assembly and Adjustments

1. Loosen gearcase clamp screw.
. Remove the gearcase index screw.
. Slide the gearcase oriented as shown in 

Figure 5 onto the shaft tube insuring that 

the flex drive is engaged in the gearcase.

NOTE:

It may be necessary to pull the flex cable out 

from the shaft tube, engage into the gearcase 

and then slide the assembly onto the shaft tube.

4. Reinstall the index screw and tighten 

securely.

5. Tighten the clamp screw and torque to 

5 – 69 inch pounds.