DeVillbiss Air Power Company VR1600E Manuale Utente

Pagina di 56
8- ENG 
A17913
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the 
water supply.
Motor (located inside the shroud): Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun and 
wand. 
Spray Gun: Connects with wand to control water flow rate, direction, and 
pressure.
Spray Wand With Variable Spray Nozzle: Spray nozzle adjusts from a narrow 
jet stream to a fan jet spray. The spray can be adjusted by twisting the nozzle 
clockwise and/or counterclockwise. 
Rotary Nozzle: increases cleaning efficiency by allowing you to cover more area 
while using a concentrated spray pattern.
Cleaning Solution Application Unit: Used to apply cleaning solutions, see How 
To Use Cleaning Solution Application Unit  in this section. 
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING 
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the 
location of various controls and adjustments. Save this manual for future reference.
PRESSURE WASHER TERMINOLOGY
Ground Fault Circuit Interrupter Protection (GFCI): This washer is provided with 
a ground fault circuit interrupter (GFCI) built into the plug of the power supply 
cord. This device provides additional protection from the risk of electric shock. 
Should replacement of the plug or cord become necessary, use only identical 
replacement parts that include GFCI protection.
Motor
High Pres-
sure Hose
Spray 
Gun
Spray 
Wand 
with 
Variable 
Spray 
Nozzle
Electric 
Cord
Water 
outlet
Water 
inlet with 
filter
Quick-connect
Quick-connect adapter
Motor 
ON-OFF 
switch
Cleaning Solution 
application unit
Rotary Nozzle
High Pressure Pump