Viking PJ-14 Manuale Utente

The PJ-14 provides one or two lines of Teleguard

  protection built into a wall mountable RJ-14 jack.

Power:  Phone line powered (25V-100V DC “on-hook” talk battery, 10mA-100mA )
Dimensions:  5.1 cm x 5.7 cm x 2.2 cm (2” x 2.25” x .875”)
Environmental:  -26

°

 C to 54

°

 C (-15

°

 F to 130

°

 F) with 5% to 95% non-condensing humidity

Shipping Weight:  115 g (4 oz)
Connections: RJ-14 female plug

The TG-1 and TG-3 provide single line Teleguard

protection ideal for punch down or terminal block installation.

Power:  Phone line powered (TG-1 - 25V-100V DC “on-hook” talk battery, 10mA-100mA TG-3 - 12-24V DC “on-hook” talk battery,
10mA-100mA)
Dimensions:  6.35 cm (2.5”)
Environmental:  -26

°

 C to 54

°

 C (-15

°

 F to 130

°

 F) with 5% to 95% non-condensing humidity

Shipping Weight:  28 g (1 oz)
Connections:  Punch down/terminal block

Power:  Phone line powered (25V-100V DC “on-hook” talk battery, 10mA-100mA )
Dimensions:  2.54 cm x  3.81 cm x 2.2 cm (1” x 1.5” x .875”)
Environment:  -26

°

 C to 54

°

 C (-15

°

 F to 130

°

 F) with 5% to 95% non-condensing humidity

Shipping Weight:
Weight:  57 g (2 oz)
Connections:  RJ-11 male and female

The TG-2 installs modularly and provides Teleguard

 protection for two devices from a single line RJ-11 “T” adapter.

1.  Pry the cover off of the PJ-14 using a screwdriver in the appropriate housing slots.
2.  Connect line 1 to the terminal screws with red and green wires (See Diagram 1 below).
3.  Connect line 2 to the terminal screws with yellow and black wires (See Diagram 1 below).
4.  Mount the PJ-14 base to a wall using the two wood screws and mounting holes provided (See Diagram 1 below).
5.  Replace the cover of the PJ-14.

Note:  For runs between the TG-1/TG-3 and the device that are
greater than a few feet, line imbalance may occur.  To correct
this, add a second TG-1 or TG-3 to the opposite side of the line.