AmpliVox SW905 Manuale Utente
Front Panel Diagram
Troubleshooting
12
Problem
Items to check
Unit will not turn on
• Is unit plugged in?
• Are batteries charged?
• Are batteries charged?
• Are fuses blown?
Unit operates on AC but not on battery
• Check battery terminals
• Check 10A fuse
Sound is distorted
• If “Maximum Output” is lit, turn
down volume
• If using wireless mic, is red ‘Audio
Peak’ lit? If so, signal (such as
voice) is too strong. Move
microphone farther away from
source.
voice) is too strong. Move
microphone farther away from
source.
• Turn down input source (such as
keyboards, etc.) since the output of
some devices may be too high
some devices may be too high
• Check for debris on speaker cone
(sand, etc.)
Sound is muffled
• Bass too high
• Treble too low
• Treble too low
Loud squealing sound coming from unit
• “Feedback” occurs when a
microphone is too close to the
speaker or gain is too high. Move
microphone farther away from
speakers and/or turn down channel
gain.
speaker or gain is too high. Move
microphone farther away from
speakers and/or turn down channel
gain.
Power is on, but no sound
• check volume levels for each
channel and main volume
• if using wireless, be sure
receiver(s) and/or transmitter
battery is installed and/or is on
battery is installed and/or is on
• If using “line insert”, loop must be
completed. See “special features”
section.
section.
• Check speaker connection
• If “Maximum Output” is lit,
replace power amplifier board
Microphone signal is weak
• If mic has batteries, check batteries
in microphone
• Turn on phantom power if
applicable
• Check cables/connectors
• Is Mic/Line switch in proper
• Is Mic/Line switch in proper
position?
11