Lexmark T64x Manuale Utente

If you purchased an output option (finisher, expander, or mailbox), follow these steps:

Remove the top cover from the printer.

You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the 
output option.

Remove the option from the box, and follow the setup instructions included with the option.

Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward.

The wire bail came with the printer and rests in the standard output bin when installed.

Attach the plastic bracket to the finisher, expander, or mailbox.

Go to