Lexmark 4039-1XX Manuale Utente

Service Manual

1. Remove the print cartridge.

2. Remove the fuser input guide. 

3. Grasp the housing and pull toward the front of the machine to 

disconnect the housing from the mounting studs, visible through 
openings [B] in the inner deflector. 

4. Lift the transfer roll housing far enough to disconnect the system 

cable. 

5. Lift the transfer roll housing out of the machine. 

6. To replace the transfer roll housing, perform the removal 

procedure in reverse order. After replacing the Transfer Roll 
Housing, open the top cover, power the machine off then on, to 
ensure the erase lamps flash off and on.