Panasonic KX-FLB811 Manuale Utente
8. Programmable Features
59
8.2 Basic features
Feature/Code
Selection
Setting the quick setup
{#}{
{#}{
1}{0}{0}
You can print out the quick fax setup guide and select the desired
receiving mode depending on your situation.
{
receiving mode depending on your situation.
{
1} “
FAX ONLY” (default): Use only as a fax (page 36).
{
2} “
DIST. RING”: With the Distinctive Ring service (page 42).
{
3} “
EXT. TAM”: With an external telephone answering machine
4} “
TEL ONLY”: Mostly phone calls (page 36).
1. Press {MENU}.
2. Press {#}, then {1}{0}{0}.
3. Press {SET}.
4. Press {SET} again to print the quick fax setup guide.
L
If you do not wish to print it, press {STOP}.
5. Press {1} to {4} to display the desired setting.
6. Press {SET}.
7. Press {MENU}.
Setting the date and time
{#}{
{#}{
1}{0}{1}
Enter the date and time using the dial keypad. See page 24 for details.
Setting your logo
{#}{
{#}{
1}{0}{2}
Enter your logo using the dial keypad. See page 25 for details.
Setting your fax number
{#}{
{#}{
1}{0}{3}
Enter your fax number using the dial keypad. See page 27 for details.
Setting the dialing mode
{#}{
{#}{
1}{2}{0}
{
1} “
PULSE”
{
2} “
TONE” (default)
See page 22 for details.
Setting flash time
{#}{
{#}{
1}{2}{1}
The flash time depends on your telephone exchange or host PBX.
{
{
1} “
700ms” (default)
{
2} “
600ms”
{
3} “
400ms”
{
4} “
300ms”
{
5} “
250ms”
{
6} “
110ms”
{
7} “
100ms”
{
8} “
90ms”
Note:
L
If the unit is connected via a PBX, PBX functions (transferring a
call, etc.) might not work correctly. Consult your PBX supplier for
the correct setting.
call, etc.) might not work correctly. Consult your PBX supplier for
the correct setting.
Changing the LCD display
contrast
{#}{
contrast
{#}{
1}{4}{5}
{
1} “
NORMAL” (default): For normal contrast.
{
2} “
DARKER”: Used when the display contrast is too light.
Setting the ringer pattern
{#}{
{#}{
1}{6}{1}
{
1} “
A” (default)
{
2} “
B”
{
3} “
C”
FLB811-PFQX2307ZB-en.book Page 59 Thursday, February 16, 2006 3:57 PM