Toshiba e-STUDIO351c Manuale Utente
June 2005 © TOSHIBA TEC
e-STUDIO281c/351c/451c ADJUSTMENT
3 - 29
3
3.5.4
Color balance adjustment
The color balance is adjusted by adjusting the density of each color at the Full Color Mode. The adjust-
ment is performed by selecting its density area from the following: low density, medium density and high
density.
ment is performed by selecting its density area from the following: low density, medium density and high
density.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
ment using the following procedure.
Note:
Note:
Be sure that this adjustment be made after performing “3.5.1 Automatic gamma adjustment”.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the code of the mode to be adjusted (color and original mode) and press the [START] but-
(2) Key in the code of the mode to be adjusted (color and original mode) and press the [START] but-
ton.
(3) Select the density area to be adjusted with digital keys (0, 1 or 2), and press the [START] button.
0: Low density (L)
1: Medium density (M)
2: High density (H)
1: Medium density (M)
2: High density (H)
(4) Key in an adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)
(5) Press the [ENTER] or [INTERRUPT] button to store the value in memory.
(5) Press the [ENTER] or [INTERRUPT] button to store the value in memory.
→ The equipment goes back to the ready state.
(6) For resetting the value, repeat step (2) to (5).
(7) Press the [FAX] button and then press the [START] button to make a test copy.
(8) If the desired image has not been attained, repeat step (2) to (7).
(7) Press the [FAX] button and then press the [START] button to make a test copy.
(8) If the desired image has not been attained, repeat step (2) to (7).
Color
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
Printed
Image
Photo
Map
Yellow
1779-0
1780-0
1781-0
1782-0
1783-0
Low density
The larger the value is,
the darker the color to
be adjusted becomes.
Acceptable values:
0 to 255. (Default: 128)
1779-1
1780-1
1781-1
1782-1
1783-1
Medium density
1779-2
1780-2
1781-2
1782-2
1783-2
High density
Magenta
1784-0
1785-0
1786-0
1787-0
1788-0
Low density
1784-1
1785-1
1786-1
1787-1
1788-1
Medium density
1784-2
1785-2
1786-2
1787-2
1788-2
High density
Cyan
1789-0
1790-0
1791-0
1792-0
1793-0
Low density
1789-1
1790-1
1791-1
1792-1
1793-1
Medium density
1789-2
1790-2
1791-2
1792-2
1793-2
High density
Black
1794-0
1795-0
1796-0
1798-0
1798-0
Low density
1794-1
1795-1
1796-1
1798-1
1798-1
Medium density
1794-2
1795-2
1796-2
1798-2
1798-2
High density