Toshiba e-STUDIO351c Manuale Utente
June 2005 © TOSHIBA TEC
e-STUDIO281c/351c/451c ADJUSTMENT
3 - 63
3
3.12 Adjustment of the RADF (MR-3018)
3.12.1
Adjustment of RADF Position
Perform this adjustment when the RADF is not installed in the correct position.
Note:
Note:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the RADF.
the RADF.
[A] Checking
(1) Open the RADF and install 2 positioning pins
(the positioning pins are installed to the back
side of the hinge which is on the left side of
the RADF).
side of the hinge which is on the left side of
the RADF).
Fig.3-36
(2) Remove the platen sheet.
Fig.3-37