Toshiba e-STUDIO351c Manuale Utente
e-STUDIO281c/351c/451c ADJUSTMENT
June 2005 © TOSHIBA TEC
3 - 78
3.13 Adjustment of the Finisher (MJ-1022)
3.13.1
Adjusting the jogging plate width
(1) Remove the right inner cover and the rear cover.
(4) Measure the jogging width (standard at 317 mm).
(2) Adjust the front jogging plate to the home
position.
• Set SW1 on the finisher controller PC
• Set SW1 on the finisher controller PC
board as shown in Fig. 3-1301.
• Press SW2 twice on the finisher controller
PC board.
- The front jogging plate moves to the
- The front jogging plate moves to the
home position.
Fig.3-66
(3) Adjust the rear jogging plate to the home
position.
• Set SW1 on the finisher controller PC
• Set SW1 on the finisher controller PC
board as shown in Fig. 3-1302.
• Press SW2 twice on the finisher controller
PC board.
- The rear jogging plate moves to the
- The rear jogging plate moves to the
home position.
Fig.3-67
Fig.3-68
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
Rear jogging plate home position