Manualsbrain.com
  1. Manuali
  2. Marche
  3. Intel
  4. 1520
  5. Manuale Utente

Intel 1520 Manuale Utente

Scarica
Pagina di 176
42
Intel NetStructure Cache Appliance Administrator’s Guide
▼ Adding an ICP Peer
1
Click the ICP Peers link.
2
Click the Add Entry button.
3
Enter the information for the ICP peer host. If you want to clear the entire 
form of information, you can press the Reset button.
4
Click the Add button to save your changes. 
Field 
Description 
Hostname
The hostname for the ICP host. You do not have to enter 
a hostname if you know the host IP address. 
If you enter a hostname but leave the IP address as 
0.0.0.0, the ICP configuration obtains the host IP 
address via a DNS lookup on the entered hostname. 
Therefore, if you do not know the IP address, simply 
leave it as 0.0.0.0.
Host IPThe host IP
 address.
If you enter an IP address other than 0.0.0.0, the ICP 
configuration uses the IP address to identify the host. 
Otherwise, the ICP configuration requires a hostname. 
Type
ICP host type. Use one of the following options:
❚
1 specifies a parent cache
❚
2 specifies a sibling cache
❚
3 specifies the local host
Option 3 is reserved for the appliance. In option 3, the 
hostname must be 
localhost
 and the host IP address 
must be 0.0.0.0. The ICP configuration enforces this 
convention. 
Proxy Port
The appliance’s proxy port (usually 8080).
ICP Port
The UDP port used for ICP (usually 3130).
Multicast Member
Indicates whether the host is on a multicast network with 
the appliance. Use one of the following options:
❚
No
❚
Yes
Multicast IPThe multicast IP
 address. 
Multicast TTL
The multicast datagram time to live. Use one of the 
following options:
❚
1: specifies that IP multicast datagrams will not be 
forwarded beyond a single subnetwork.
❚
2: allows delivery of IP multicast datagrams to more 
than one subnet if there are one or more multicast 
routers attached to the first hop subnet.