Manualsbrain.com
  1. Manuali
  2. Marche
  3. SharkRack
  4. 45U
  5. Manuale Utente

SharkRack 45U Manuale Utente

Scarica
Pagina di 46
SharkRack Enclosure Installation Guide 
ID-00210-000 
REV D, ECO2773 
Page 26 of 46 
 
How to Remove or Install Side Panels 
 
Step Detail 
The Side Panels can be removed to provide 
further access to equipment mounted inside 
the cabinet. This is a great way to get added 
access for cable management or installing 
powerstrips. 
 
To remove a Side Panel: 
1. Unlock the Side Panel using the key, if 
necessary. 
2. Slide both Side Panel latches inward 
towards each other at the same time and 
tilt the panel outward. 
 
Note: If using a grounding kit, remove the 
cable prior to lifting the panel from the 
Cabinet Frame.  See “Installing a 
Grounding Kit” for details. 
 
3. Release the latches and lift the Side Panel 
up and off the cabinet frame. 
4. Remove the Side Panel and set aside. 
 
To install a Side Panel: 
1. Approaching the cabinet from the side, set 
the bottom edge of the Side Panel onto 
the Cabinet Frame 
2. The bottom edge of the panel must 
securely engage with the cabinet frame 
before pushing the top of the panel 
forward into place. 
3. Lock the panel using the key, if preferred. 
 
 
 
 
Figure 26 
42U X 37DP Cabinet Shown