Toshiba B-EX Manuale Utente
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
41
[Product] Group
[Printer Serial No.]:
The serial number specific to the printer is displayed.
This setting cannot be changed.
This setting cannot be changed.
[SHELL]:
The status of the SHELL function is displayed.
This setting cannot be changed.
This setting cannot be changed.
[Sensor] Group
[Reflective Sensor Threshold Select]:
Select how to set the threshold for the reflective sensor.
Default Command
Set
Options
Manual Set, Command Set
[Reflective Sensor Threshold]:
Set a fine adjustment value for threshold to the reflective sensor output in units of 0.1 V.
Default 1.0
V
Range
0.1 to 4.0 V
[Transmissive Sensor Threshold Select]:
Select how to set the threshold for the transmissive sensor.
Default Command
Set
Options
Manual Set, Command Set
[Transmissive Sensor Threshold]:
Set a fine adjustment value for threshold to the transmissive sensor output in units of 0.1 V.
Default 1.4
V
Range
0.1 to 4.0 V
[Ribbon Adjustment] Group
[Drive Voltage (Take-up)]:
Fine adjust the ribbon take-up motor voltage (torque).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range
Range
-15 to +10
[Drive Voltage (Feed)]:
Fine adjust the ribbon feed motor voltage (torque).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range
Range
-15 to +10
[RTC] Group
[Date Time]:
The current date and time programmed for the RTC module are displayed.
This setting cannot be changed.
This setting cannot be changed.
[Battery Check]:
Select whether to enable or disable the battery check function.
Default Disable
Options Disable,
Options Disable,
Enable
[Renewal]:
Select the timing when the date and time are updated during printing.
Default Batch
Options Batch,
Options Batch,
Page