Samsung SF-6800 Manuale Utente
3.7
Troubleshooting
3
Troubleshooting
Display
Meaning
Solution
NO. NOT ASSIGNED
NO PAPER
SUPPLY PAPER
OVERHEAT
PAPER JAM 0
OPEN/CLOSE DOOR
OPEN/CLOSE DOOR
PAPER JAM 1
OPEN/CLOSE DOOR
OPEN/CLOSE DOOR
PAPER JAM 2
CHECK INSIDE
CHECK INSIDE
POLLING ERROR
The one-touch or speed dial location
you tried to use has no number
assigned to it.
you tried to use has no number
assigned to it.
Dial the number manually with the
keypad, or assign the number.
keypad, or assign the number.
The printer part in your unit has
overheated.
overheated.
Please wait until it cools down. If
you cannot solve the problem,
please call service.
you cannot solve the problem,
please call service.
Recording paper has jammed in
paper feeding area.
paper feeding area.
Clear the jam.
Recording paper has jammed inside
the unit.
the unit.
The jammed paper still remains
inside the unit.
inside the unit.
Clear the jam.
Clear the jam.
The remote fax machine you want to
poll is not ready to respond to your
poll.
poll is not ready to respond to your
poll.
Or
When setting up to poll another fax
machine, you have used an incorrect
poll code.
machine, you have used an incorrect
poll code.
The remote operator should know
in advance that you are polling
and have their fax unit loaded
with the original document.
in advance that you are polling
and have their fax unit loaded
with the original document.
Enter the correct poll code.
The recording paper has run out.
Load the recording paper.
TONER LOW
The toner is almost empty.
Take out the toner cartridge
machine and gently shake it. By
doing this, you can temporarily
re-establish printing operations.
machine and gently shake it. By
doing this, you can temporarily
re-establish printing operations.
TONER EMPTY
The toner cartridge has run out .
The machine stops.
The machine stops.
Replace with a new toner
cartridge.
cartridge.
FUSER ERROR
ENGINE ERROR
There occurs a problem in the fuser
unit
unit
A problem has occurred in the LSU
(Laser Scanning Unit)
(Laser Scanning Unit)
Unplug the power cord and plug
it in again. If you cannot solve the
problem, please call service.
it in again. If you cannot solve the
problem, please call service.
Unplug the power code and plug
it in again. If you cannot solve the
problem, please call service.
it in again. If you cannot solve the
problem, please call service.