Tyco 0-1591700-x Manuale Utente

This option allows you to store the current configuration of the access point in a safe location. In 
addition, the saved settings can be restored if required. Select Next to obtain the detailed menus 
and then select Backup Settings to save the configuration. The backup file is called config.bin and 
should be saved in a specific directory for the access point away from Windows files. Click the 
Save button and an explorer dialogue box will be displayed. Choose the target location for the 
backup file and then select Save As. The backup will start and a progress box will show when the 
download has been completed. 

This menu option displays a summary of the current radio, LAN, encryption settings together with 
asset information about the access point.  
 

 

The above screenshot shows the default settings for the access point together with the system run 
time and firmware version and serial number. If you require technical support, please provide the 
information listed above. 

The access point will need to be reset when certain settings are changed or if it stops responding 
correctly. This reset is normally implemented by selecting the Reset button and accepting the 
screen prompts. The programmed access point settings will not be changed by this soft reset. To 
perform the reset, click on the screen Reset button and you will be asked to confirm your decision. 
The reset procedure takes about 60 seconds and a moving bar in the browser window shows the 
progress of the reset.  
Note that after certain key values of the access point are changed, then the web screen Reset 
button will flash prompting you to reset the device.