Telect MIX 56 Manuale Utente
2 Installation
MIX 56 User Manual
2-6
Telect, Inc. 122188-10 A0
3.
Tighten the screws until the bracket is securely attached.
4.
Repeat steps 2 and 3 on the other side of the chassis.
Rack-Mounting the Chassis
A single MIX 56 chassis requires 5.25 in. of vertical space (the height of
the chassis). When installing one chassis on top of another, install a heat
baffle of at least one rack unit above and below the pair. See “Location and
Space” on page 2-2 for an illustration.
the chassis). When installing one chassis on top of another, install a heat
baffle of at least one rack unit above and below the pair. See “Location and
Space” on page 2-2 for an illustration.
NOTE
Be sure the mounting brackets attached to the chassis are appropriate for
the size of the rack. See “Attaching the Mounting Brackets” on page 2-5.
the size of the rack. See “Attaching the Mounting Brackets” on page 2-5.
For 3-inch Projection
Extender Bracket