Telect MIX 56 Manuale Utente
2 Installation
MIX 56 User Manual
2-14
Telect, Inc. 122188-10 A0
3.
Replace the M13 card door by inserting the two screws into the
slots on the chassis and tightening them until the door is securely
attached to the chassis.
slots on the chassis and tightening them until the door is securely
attached to the chassis.
Supplying Power
CAUTION
!
CAUTION! Do not supply power until all connections are made
in accordance with requirements from local electrical codes.
in accordance with requirements from local electrical codes.
Each system has its own power receptacle that accepts the included four-
position, Phoenix-type connector to supply redundant power to the system.
Telect recommends a minimum of 18 AWG wire and either a 1A fuse at
nominal -48Vdc or a 2A fuse at nominal 24Vdc.
position, Phoenix-type connector to supply redundant power to the system.
Telect recommends a minimum of 18 AWG wire and either a 1A fuse at
nominal -48Vdc or a 2A fuse at nominal 24Vdc.
M13 Card
Ejector Handle