Compex Technologies 18A Manuale Utente

 

 

52 

 

the DHCP Start IP Address should be 192.168.168.X where 
X is any value from 2 to 254. 
 
It is preset to 

. 

 

This is the last IP address that the DHCP server can assign. 
The value you enter should also belong to the same 
subnet as your router.  
 
For example if the IP address and network mask of your 

router are 192.168.168.1 and 255.255.255.0 respectively, 
the DHCP End IP Address should be 192.168.168.X where X 
is any value from 2 to 254.  
 
It is preset as 

. 

 

Enter the IP address of the gateway to Internet or of the 
router if this access point is the one connecting to the 
Internet. 
 
If your network uses multiple gateways / access points, 
you may wish the router to act as DHCP server to a LAN 
segment while another access point connects to the 
Internet or to another LAN. 
 

Though the DHCP server usually acts as the Default 
Gateway of the DHCP client, you can define a different 
<DHCP Gateway IP address>, which will be allocated as 
the Default Gateway of the DHCP client. 
The DHCP client will thus receive its dynamic IP address 
from the router but will access the Internet or the other 
LAN through the Default Gateway defined by the <DHCP 
Gateway IP address>. 

 

Enable this option if you want the router to use only the 
DNS server you have specified. 

 

Your ISP usually provides the IP address of the DNS server.

 

This optional field is for the IP address of a secondary DNS 
server. 

 

If DHCP server is disabled you will need to manually 

configure the TCP/IP parameters of each computer in 
your LAN.