Enterasys Networks 1H582-xx Manuale Utente
Port Configuration Command Set
Setting Port Auto-Negotiation and Advertised Ability
4-26
4.3.5.4
set port advertised ability
Use this command to enable or disable and to configure the advertised ability on one or more ports.
set port advertised ability port-string {10 | 100 | 1000 | all} {half | full | all}
{flowcontrol} {disable | enable}
{flowcontrol} {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable Fast Ethernet front panel port 1 from advertising any speed or
duplex settings:
duplex settings:
port-string
Specifies the port(s) for which to enable, disable or
configure advertised ability. For a detailed description of
possible port-string values, refer to
configure advertised ability. For a detailed description of
possible port-string values, refer to
.
10 | 100 | 1000 |
all
all
Specifies a speed for the port to advertise in Mbps, or
enables the port to advertise all the speeds at which it can
operate.
enables the port to advertise all the speeds at which it can
operate.
half | full | all
Specifies a duplex mode for the port to advertise, or enables
the port to advertise all the duplex modes at which it can
operate.
the port to advertise all the duplex modes at which it can
operate.
flowcontrol
Specifies flow control for advertisement.
disable | enable
Disables or enables advertised ability with the parameters
specified.
specified.
Matrix>set port advertised ability fe.0.1 all disable