Enterasys Networks 2000 Manuale Utente

Enterasys recommends that only qualified personnel conduct installation of any XP chassis.

: Before performing any upgrade or installation procedures, ensure that the 

XP-2000 is powered off.

This section contains procedures for the following types of installation:

•

Table-top installation

•

Rack mount installation

You can install the XP-2000 on a tabletop.

1.

Select a table that is stable (not wobbly) and is not in an area subject to frequent foot traffic. 
Remember that you will be attaching numerous cables to the XP-2000.

2.

Place the XP-2000 on the table, allowing at least 3” of space on each side for adequate air flow 
to the cooling fans.

You can install the XP-2000 in a standard 19” equipment rack. The XP-2000 chassis contains screw 
holes for front-mounting brackets. 

Never attempt to rack mount the XP-2000 unaided. Ask an assistant to help you hold the 
chassis.

To install the XP-2000 chassis in an equipment rack, use the following procedure. You need a 
phillips-head screwdriver to perform this procedure.

 shows an example of how to install the XP-2000 in an equipment rack. The procedure 

following the figure describes how to install the XP-2000 in an equipment rack.