Enterasys Networks 2000 Manuale Utente

When you are in Configure or Enable mode, use the exit command or press Ctrl+Z to exit to the 
previous access mode.

When you exit Configure mode, the CLI will ask you whether you want to activate the 
configuration commands you have issued. If you enter yes or y, the configuration 
commands you issued are placed into effect and the XP-2000’s configuration is changed 
accordingly. However, the changes are not written to the Startup configuration file in the 
XP-2000’s boot flash and therefore are not reinstated after a reboot. See Activating 
Configuration Changes and Saving the Configuration File

 for information 

about saving configuration changes.

The CLI supports EMACs-like line editing commands. The following table lists some commonly 
used commands. For a complete set of commands, see the The TeraLink 2000 Series Library: User 
Reference.  

Ctrl+A

Move cursor to beginning of line

Ctrl+B

Move cursor back one character

Ctrl+D

Delete character

Ctrl+E

Move cursor to end of line

Ctrl+F

Move cursor forward one character

Ctrl+N

Scroll to next command in command history (use the cli show history 
command to display the history)

Ctrl+P

Scroll to previous command in command history

Ctrl+U

Erase entire line

Ctrl+X

Erase from cursor to end of line

Ctrl+Z

Exit current access mode to previous access mode