Trendnet 108Mbps 802.11g Wireless Firewall Router Manuale Utente

20 

This screen enables you to configure advanced wireless functions. 

 

Beacon Interval: Type the beacon interval in the text box. You can specify a value from 
1 to 1000. The default beacon interval is 100. 
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value 
stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until 
data flow is normalized. 
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet 
transfer error rates are high, choose values between 256 and 2432 until packet transfer 
rates are minimized. (NOTE: set this fragmentation threshold value may diminish 

.) 

DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text 
box. You can specify a value between 1 and 65535. The default value is 3. 
TX Rates (MBps): Select one of the wireless communications transfer rates, measured 
in megabytes per second, based upon the speed of wireless adapters connected to the 
WLAN. 
11g only mode: enable or disable. 
Antenna Transmit Power: Adjust the power of the antenna transmission by selecting 
from the dropping list.