Toshiba GN-1050 Manuale Utente
1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 33
1 SETTING UP WIRELESS NETWORK
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the
Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/
WPA2 or WPAPSK/WPA2PSK rather than WEP.
Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the
Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/
WPA2 or WPAPSK/WPA2PSK rather than WEP.
1
Press the [WEP] button and press the [NEXT].
The WIRELESS ENCRYPTION - WEP screen is displayed.
2
Enter the following items and press the [NEXT].
y
WEP ENCRYPTION
Select the bit length of the WEP key.
Select the bit length of the WEP key.
y
KEY ENTRY METHOD
Select the character code for the WEP key.
Select the character code for the WEP key.
y
[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
When pressing the [WEP], the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press the [OK] to set the entry.
keys, and press the [OK] to set the entry.
64 bit
128 bit
152 bit
HEX:
10
26
32
ASCII:
5
13
16