Lexmark PRO4000 Manuale Utente
Copying
ADF
Scanner glass
Use the ADF for multiple
‑page documents.
Note: The ADF is available only in select printer models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Tips for copying
•
Make sure the exit bin is fully extended and the bin extender is flipped out.
•
Use the ADF when scanning two
‑sided pages if your printer supports duplex scanning and the ADF supports the
original document size.
•
Use the scanner glass when scanning two
‑sided pages if your printer does not support duplex scanning or the ADF
does not support the original document size.
•
When using the ADF, adjust the paper guides on the ADF to the width of the original document.
•
To easily retrieve a document after copying or scanning, lift the ADF input tray.
•
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
into the ADF. Place these items on the scanner glass.
•
When the document to be copied is in place with the settings you want, press
to start copying.
Making copies
1
Load paper.
2
Load an original document faceup into the ADF or facedown on the scanner glass.
3
From the printer control panel, navigate to:
> Copy >
O K
> Copies
4
Press the left or right arrow button to select the number of copies.
Copying
58