Lexmark PRO4000 Manuale Utente
5
Set the color, quality, original image size, and other scan options. If necessary, press
O K
each time you make a
selection.
6
Press
.
Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture to scan
documents using a network printer and save the scan output.
documents using a network printer and save the scan output.
Adding a network folder shortcut
1
On your computer, create a shared folder with read/write access.
2
On a Web browser, type your printer IP address, and then press Enter.
3
Navigate to either of the following:
•
Settings > Scan
‑to‑Network Folder Setup
•
Settings > Manage Shortcuts > Add New Shortcut > Scan to Network
4
Enter the necessary information, and then click Add.
Note: To avoid unsaved changes to your settings, make sure the network folder shortcut name is different from that
of your folder name.
of your folder name.
Scanning to a flash drive or memory card
Notes:
•
Some features are available only in select printer models.
•
Make sure your flash drive or memory card is not write
‑protected.
1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel navigate to:
> Scan >
O K
> Memory Device
3
Insert the flash drive or memory card, and then press
O K
.
Note: The printer reads only one memory device at a time.
4
Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right
arrow button to scroll to the setting you want.
arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
O K
each time you make a
selection.
5
Press
.
Follow the instructions on the printer display.
Scanning
66