Toshiba GA-1040 Manuale Utente
5
5-14
Setting up Network Servers
Configuring clients of a Windows NT 4.0 server
Each client of a Windows NT 4.0 server is already using a network protocol to
communicate with the server. Each client can print to the GA-1040 if it has been
shared by a Windows NT 4.0 Server or Windows NT 4.0 Workstation computer.
In that case the client does not have to use the same network protocol to connect to
the Windows NT 4.0 server as the server uses to communicate with the GA-1040.
communicate with the server. Each client can print to the GA-1040 if it has been
shared by a Windows NT 4.0 Server or Windows NT 4.0 Workstation computer.
In that case the client does not have to use the same network protocol to connect to
the Windows NT 4.0 server as the server uses to communicate with the GA-1040.
T
O
CONNECT
AND
PRINT
TO
THE
GA-1040
SHARED
BY
THE
W
INDOWS
NT 4.0
SERVER
•
For Windows NT 4.0 Workstation clients, before printing, connect to the print server
computer and select the GA-1040. Right mouse click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
computer and select the GA-1040. Right mouse click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties are grayed and not available for changing. When a
client chooses Print, the job is transmitted to the Windows NT 4.0 print server, and
from there to the selected queue on the GA-1040. The job is listed in the Print
Manager on the client workstation, and the administrator can track it in the GA-1040
window in the Print Manager on the Windows NT 4.0 print server.
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties are grayed and not available for changing. When a
client chooses Print, the job is transmitted to the Windows NT 4.0 print server, and
from there to the selected queue on the GA-1040. The job is listed in the Print
Manager on the client workstation, and the administrator can track it in the GA-1040
window in the Print Manager on the Windows NT 4.0 print server.
Configuring the GA-1040 and clients for Fiery WebTools
The Fiery WebTools offer access to many GA-1040 functions via the Internet (or your
company’s intranet), thus providing additional flexibility in remote management. You
can access the Fiery WebTools from a Mac OS or Windows computer.
company’s intranet), thus providing additional flexibility in remote management. You
can access the Fiery WebTools from a Mac OS or Windows computer.
T
O
SET
UP
F
IERY
W
EB
T
OOLS
ON
THE
GA-1040
1.
Perform GA-1040 Setup and enable TCP/IP.
In Protocol Setup, perform TCP/IP Setup and enable Ethernet.
2.
Set a valid, unique IP Address for the GA-1040, and then set the subnet mask and a
gateway address if necessary.
gateway address if necessary.
3.
Enable Web Services.